Seeking CPU's

kuun · Post by **kuun** » Tue Jan 14, 2003 8:36 pm

i am a fanatical CPU collector

i have the following,
Intel:
Dx 25
Dx2 50
Dx3 75
Sx 33
Sx2 66
Pentium 90
Pentium 120
Pentium 150
Pentium 166MMX
Pentium 200MMX
Pentium 233MMX
Pentium Pro 180
Pentium 2 Celerons (4x) 500
AMD:
Amd 5x86 133
K6-2 500
Cyrix:
Cyrix 166

as you can tell i mostly have Intel Cpu's, they are the most abundant to me, but i do have a very old AMD cpu, the K5

thats my favorite piece,

anyhow im looking for the P2 300-450 chips
any of the PPRO or XEON cpu's <-- these i will pay for.. i am desperate for a XEON cpu
any of the AMD line (Working cpu's only, my k6-s 500 does not work (core meltdown from overheat while overclocking(not done by me)))
Any of the Cyrix cpu's
and any cpu's that are old and rare

Kuun

Blueneko · Post by **Blueneko** » Wed Jan 15, 2003 12:09 am

I have an amd k62- 350 cpu that hasnt been used for a while, been floating around my desktop on and off, im sure it works. I also have a pentium 120, and a pentium 133 that are on my window sil. I have a burnt out p3 550, too many network cards, (3com) 10/100 small. and a p3 1 ghz 1000/256/133/ SL4C8

Blueneko · Post by **Blueneko** » Wed Jan 15, 2003 12:11 am

OH and 2 intel overdrive cpu's that are tacked up on the corkscrew billboard at my desk! one socket 3 and other is socket5/7

InactiveX · Post by **InactiveX** » Wed Jan 15, 2003 10:14 am

486SX-25
486DX-33
Pentium 90
Pentium 100
K6-2 400
Celeron 433
Celeron 333
PentiumII 350
Loads of old motherboards (soon to be turned into hardware firewall/routers and sold for $$$)
A plethora of network cards, modems, etc.
Various old RAM chips
Atari ST
Sinclair ZX81
Sinclair ZX Spectrum+
BBC Micro Model B (My favourite computer ever - apart from my BP6)

kuun · Post by **kuun** » Wed Jan 15, 2003 6:05 pm

the pentium over drive's sound good if they are functional CPU's.. if they have the tack hole i nthem i dont want, i mainly want the socket5/7 OD chip,

gabumon wrote:OH and 2 intel overdrive cpu's that are tacked up on the corkscrew billboard at my desk! one socket 3 and other is socket5/7

ok the following i like and would buy,
Atari ST
Sinclair ZX81
Sinclair ZX Spectrum+
PentiumII 350
K6-2 400

Kuun

InactiveX wrote:486SX-25
486DX-33
Pentium 90
Pentium 100
K6-2 400
Celeron 433
Celeron 333
PentiumII 350
Loads of old motherboards (soon to be turned into hardware firewall/routers and sold for $$$)
A plethora of network cards, modems, etc.
Various old RAM chips
Atari ST
Sinclair ZX81
Sinclair ZX Spectrum+
BBC Micro Model B (My favourite computer ever - apart from my BP6)

BCN · Post by **BCN** » Wed Jan 15, 2003 7:29 pm

if you are interested I have 486DX2 66MHz working CPU - just like 1 month ago we have upgraded..

to pentium S 166@225MHz

(took from my boss, cause he wanted to throw it to the garbage

))

and also some old simms...

well working mobo from 486 and an 8X CDROM

failing modem 56K...

kuun · Post by **kuun** » Wed Jan 15, 2003 7:33 pm

notice:

of al lthe CPU's i have, i dont want more of them

i have most of the 486 line

and overdrive, PPRO, XEON and the DX4100 by intel are the main "older" cpu's im after atm

any of the 5x86 4x86 (k5 or k4) series i would like

cyrix is only if it's cheap

the DX and SX series are not rare, i dont want them, i already ahve enough, however OVerdrive and PPRo's and Xeons are rare

Kuun

BCN · Post by **BCN** » Wed Jan 15, 2003 7:36 pm

Well, I had two PPro200MMX with 512kb cache like 3-4 months ago, but I sold them to other collectionists...

Well, have a good luck for them!

Blueneko · Post by **Blueneko** » Wed Jan 15, 2003 10:40 pm

I have two pentium pros in my server im about to sell (Intel providence server board with two ppro 200's with 512K cache, I know they werent matching, but they have been used nonstop the 8 months I use dthem to work, and it still works, just upgraded to a bp6
and the overdrive cpu was working, but dunno know, and no there was not a tack hole in the cpu, it may have a bent pin or 2, or 20

kuun · Post by **kuun** » Thu Jan 16, 2003 2:57 pm

ooooohhhhh

if you could halfarse straiten the pins i'd take the Overdrive CPU, make sure it works too (if you can)

and your selling a dual PPRO serveR? oohhhh i want

are ppro's OC'able?

Kuun

Blueneko · Post by **Blueneko** » Thu Jan 16, 2003 3:01 pm

Never tried to overclock the fossil server board, its an intel pr440fx board, I also have four 128mb modules on it (Buffered memory) And I took a look @ the intel Overdrive cpu, multiple bent pins, and I Believe it was a 166

kuun · Post by **kuun** » Thu Jan 16, 2003 3:35 pm

how badly bent?

i've bent alot of pins on my old 200MMX and my first CPU ever the P120

they both work perfectly to this day

Kuun

BCN · Post by **BCN** » Thu Jan 16, 2003 6:05 pm

kuun wrote:ooooohhhhh

if you could halfarse straiten the pins i'd take the Overdrive CPU, make sure it works too (if you can)

and your selling a dual PPRO serveR? oohhhh i want

are ppro's OC'able?

Kuun

YES! they are overclockable and pretty well

I saw 200MHz PPros hitting in the range of 250-300MHz with voltage like 3.3V - that will depend on the board I guess

kuun · Post by **kuun** » Thu Jan 16, 2003 10:39 pm

hmm

i would seriously like a dual ppro server,

it'd make a great NAT/dialup/firewall machine and run seti at the same time

i imagine if i can get a p200mmx to 262 just fine im sure a ppro200 can make it to 266

i still want the server

Kuun

InactiveX · Post by **InactiveX** » Fri Jan 17, 2003 8:50 am

I OCed my old P200MMX to 290MHz.

It's still running in a friends machine.

Blueneko · Post by **Blueneko** » Fri Jan 17, 2003 10:52 am

How much do you wanna shell out for the pr440fx board with two 200's with 512K cache and 512mb ram (I can easily get $30 ~ 40 a stick off ebay for the memory since its buffered ram)

kuun · Post by **kuun** » Sun Jan 19, 2003 8:50 am

i dont know

if it takes dimms i have plenty of dimms to get it upto 256

but, the board is old and considering i got my own ppro 180mhz cpu for $7 i wouldnt shell out much

give me the somplete specs and i'll decide from there what'd i shell out
BTW i will pay shipping

Kuun

Blueneko · Post by **Blueneko** » Sun Jan 19, 2003 3:40 pm

the board dosent work with unbufferd memory modules, i already tried that long time ago. ill be posting it on ebay soon.....

kuun · Post by **kuun** » Sun Jan 19, 2003 10:17 pm

what would you take for it?

Blueneko · Post by **Blueneko** » Sun Jan 19, 2003 11:05 pm

board memory and cpus?
(yes with heatsinks and fan)
$175 O.B.O

kuun · Post by **kuun** » Mon Jan 20, 2003 5:55 am

ouch,

i paid less than that for my Bp6 w/ 384MB ram and both 500mhz CPU's w/ heatsinks+fans

Kuun

kuun · Post by **kuun** » Tue Jan 21, 2003 11:16 pm

so no one has cpu's they arent using?

Gubomon i want that overdrive CPU, acually i might take both

anyhow

i have aquired a AMD 500mhz t-bird a 700 mhz t-bird and a 1ghz duron all for $53 shipped

Kuun