No Post with Tualatin 1.2 or coppermine 1.0

harker · Post by **harker** » Tue May 20, 2003 9:00 am

I have been trying to upgrade my CPU using Yoshihiro's method, Tualatin-Lin Lin-Neo. I get absolutely no post with this combo. I gave up and tried a Coppermine 1.0 in a powerleap neo. same results.

Does anyone have any ideas what might be the problem?

Thanks

kuun · Post by **kuun** » Tue May 20, 2003 3:15 pm

what board revision do you have?

and whats yochirios (i dun know how to spell it)

Post by **Derek** » Tue May 20, 2003 4:20 pm

harker wrote:I have been trying to upgrade my CPU using Yoshihiro's method, Tualatin-Lin Lin-Neo. I get absolutely no post with this combo. I gave up and tried a Coppermine 1.0 in a powerleap neo. same results.

Does anyone have any ideas what might be the problem?

Thanks

You need to be using a BIOS with the Coppermine microcode

Take a look at Roby's modified BIOSs inb the files database.

harker · Post by **harker** » Tue May 20, 2003 4:26 pm

Kuun, I am pretty sure it is the 2nd version but I will confirm. Yoshihiro is the guy who successfully got a tualatin to work stacked on top of a Lin Lin and neo combo.

Derek, Yea I have tried both of roby's bios for the PIII same results.

Iwill try to confirm board revision...any other ideas

Thanks for your reply's

Post by **Derek** » Tue May 20, 2003 4:29 pm

harker wrote:Kuun, I am pretty sure it is the 2nd version but I will confirm. Yoshihiro is the guy who successfully got a tualatin to work stacked on top of a Lin Lin and neo combo.

Derek, Yea I have tried both of roby's bios for the PIII same results.

Iwill try to confirm board revision...any other ideas

Thanks for your reply's

Have you tried both CPU sockets?

harker · Post by **harker** » Tue May 20, 2003 4:38 pm

Yes both with both bios...normally the 1st thing I see is what I assume is the video card bios. then I usually get the bp6 bios screen. With new cpu I get nothing , no video bios etc. I just don't have a pci video card to eliminate that as the culprit but doesn't make sense to me that it would be ...but I am definitly a newbie on this stuff.

Post by **Derek** » Tue May 20, 2003 5:03 pm

harker wrote:Yes both with both bios...normally the 1st thing I see is what I assume is the video card bios. then I usually get the bp6 bios screen. With new cpu I get nothing , no video bios etc. I just don't have a pci video card to eliminate that as the culprit but doesn't make sense to me that it would be ...but I am definitly a newbie on this stuff.

Try holding down the "Insert" key while booting. Also try clearing the CMOS.

Edit: And what are the jumper settings on the adapters?

BP6.Com

No Post with Tualatin 1.2 or coppermine 1.0

No Post with Tualatin 1.2 or coppermine 1.0

Re: No Post with Tualatin 1.2 or coppermine 1.0