peculiar temp readouts

kuun · Post by **kuun** » Tue Dec 10, 2002 11:04 pm

CPU1 on winbond1 = 104
CPU2 on winbond2 = 113
SYST on winbond3 = 104

now, is it me or does this jsut not look right?

kuun · Post by **kuun** » Tue Dec 10, 2002 11:16 pm

another thing

core 0 is 2.03 v (Avg)
yet
core 1 is 1.49 v (avg)

whats up with that?

am i crazy or what?

kuun · Post by **kuun** » Fri Dec 13, 2002 7:10 pm

for some reason i cannot get my system to run faster than 562

i have 2 celeron 500's in it,

i want to goto at least 600,

what setting should i use? voltages? etc

RRLedford · Post by **RRLedford** » Sat Dec 14, 2002 12:18 am

Can you get each CPU to to go to 600MHz individually in either socket?
If you test, I bet you find that either one socket is weak or one CPU can't go that fast.
Do you have Northbridge cooling?
What HSFs are you using? Arctic Silver?
How many PCI cards - bus loading?
Is the HPT366 retired from Hdisk drive duty?

kuun · Post by **kuun** » Sat Dec 14, 2002 10:18 am

RRLedford wrote:Can you get each CPU to to go to 600MHz individually in either socket?
If you test, I bet you find that either one socket is weak or one CPU can't go that fast.
Do you have Northbridge cooling?
What HSFs are you using? Arctic Silver?
How many PCI cards - bus loading?
Is the HPT366 retired from Hdisk drive duty?

ok,

i've never tried the cpu's by themselves, but when i goto 600 only one cpu will register in the bios

@ 600 with 2.3v core i can get both to register but win2K wont load

whats northbridge cooling?
HSF(heatsink fan) is some fans i bought and mounted on the stock heatsink

3 pci and one isa card

HPT366 cannot be used, will either prevent system from booting or will not install, and when installed prevents 2K from booting