BP6.Com

Hi i dont want a fan steering program...therefore i use bp6fsb proggi! what i want is a program like cpucool or waterfall that activates the halt command in the cpu to save power.

Anybody knows a software Cpu cooling program for bp6 and xp that doesn´t affect stability?

Greetings Tobi

now it runs rock stable...folding proteins and hunting aliens! 2200µF seems to be enough. now i am looking for tualatin adapters to get PIII and Celeron II FCPGA to work. But those at ebay are just in USA with a shipment of 10€=$ each...i have to collect some more money. The 533Mhz Celeron was a gre...

Replaced the 1000µF EC10 with a 6.3V 2200µF one. Also disabled USB IRQ!I have no USB connected at all. Just a PS2 Keyboard. No monitor but a S3 PCI Graphics Card. A Realtek ISA NIC and a Compaq/Intel 10/100 NIC for Internet Routing. Is there any incompatibility known with one of these cards? which p...

Thanks i will try replacing the Ec10 with a bigger cap!

board is still unstable in winXP...sometimes it runs folding@home for several hours with no crash...then it crashes while its functioning only as a internet router. maybe its the bp6 ventilator management? or are there known incompatiblities with winxp or other progs? Voltages seem to be stable...no...

and PIII? Highest possible?

u know the reason for this? not dual able?whats the highest fsb and frequencie for PIII dual?

Saw some of them on ebay for a not to high pricing!
Whats possible with those one? Any 100Mhz FSB like 1GHZ Cellis (FCPGA) in dual mode after same mod like neo?Or is it necessary to do the voltage reg mod?

Thx Tobi

And what about 400@600Mhz? Succesful stories? these ones are also very cheap at ebay!maybe i get some of these in 10 pcs package and test em out...is the voltage regulator mod then necessary or is the ec10 mod enough for stable 100Mhz FSB?

Hi! Just got two 500Mhz Cellis working together (now) in my recapped and ec10 modded ver 1.0 bp6 board. How big is the chance of buying two 366Mhz celerons on ebay and letting them work at 550 and 100Mhz FSB? the 500 ones dont overclock to 750mhz. that would have been a big surprise ;-). i dont like...

finally i did it...replaced all caps =>1000µF. nothing happened..just one cpu...the resoldered atx some of the caps that i think should be related to vcore1...still nothing. after that i resoldered my exchange coil (6 windings) and then BINGO. did it works flawlessly is folding proteins since 3h. wi...

the bios is showing the 0.8V and you can measure them at voltage regulator and the mosfets around the socket. to the mosfets...i googled fpr the specs and found these ones are 30V/64A (L3103s). http://de.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=740846&N=401 If they are not interchangeable wit...

progress: just did some soldering this evening. no results..then measured voltages at the mosfets that should after yoshihiros site be respnsible for vcore1 that is 0.8V on my board. the one closer to the 4 caps shows 10V. the other one closer to the socket 0.8V. But now: fpr vcore2 that is correct ...

Thx again!
U know the description of these voltage regulators? i am in my science institute and wanted to get some new caps after work. but now i could get the new regulators in one turn.

Thx Tobi

First thanx for your effort! Im still hoping to get the board to run! Im from Germany...same time zone as sweden i think :-). Today after work i will measure those voltage regulators and change the rest of >1000µF Caps. @1. The 0.8V i can see as one of the core voltages in bios. in moment there is n...

no more hints?

i cant find any other damaged caps, regulators or coils...but the pcb is burnt (black smoke) where the broken coil was. i cant solder the new one correct in because one of the holes cant be desoldered...so i cant measure any voltage at this coil...but at the other one that is ( so i think) is respon...

Duoble post sry...connection is slow...

Last night i replaced the ec 100µF Cap with a 6.3V 1500µF one as described on one of the websites posted...no result...one of the vcores is still locked to 0.80V. The other one is good at 2.00V. I played a bit around with my voltmeter an measured the caps between the sockets and the side which is up...

In the coil link all pictures are gone...what happens if i use another coil? i soldered a 6 turn coil from an slot1 board in. but the second cpu still isnt recognized. I replaced the 4 caps near the exchanged coil too...why or when is it equal to use use 10V caps instead of 6.3? Is there a separatio...

progress made...replaced all arced 1500µF Caps (7) and 1000µF (4) that were arced...by soldering around on the board i discovered a broken coil next to the 4 1000µF Caps...i replaced it with another one from another board..it had 7 turns...the new one 6...whats the function of this coil? the board s...

thanks for the hint...but i use the intel stock coolers. the are loud but good! i wrote the ebay seller first, before i will replace the caps!

thx Tobi

Bios shows just one CPU, also if 2 CPUs are in Sockets. Another problem i can see in Bios is the Core Voltage of the CPUs....its around 0.80V :-(. It must be a sensor or reading problem...just can´t imagine that these 2.00V CPUs would boot in Windows with this voltage but the one cpu does. The capac...

Hi! I got big problems running two celerons 500mhz on the bp6 i purchased on ebay. flashed the newest bios with 1.30b Highpoint and it still recognizes in bios and in windows just one of these medocino cpus. tried both cpus in single mode in the socket closer to the keyboard connectors and they work...